50+ Years Experience in Blainville

Fixing Kenmore Dryer Loud Squeaking in Blainville

Serving homeowners in the Blainville neighborhood and surrounding areas: Hi, I'm Bob. I've been opening up washing machines and diagnosing fridges across Blainville for 50 years. I test it, find the exact broken part, and give you a straight path to fixing it.

"Servicing the North Shore and heading into Blainville is always a great drive. The properties here are beautiful, but a malfunctioning dryer ruins the peace of mind. I've been repairing machines for 50 years, and I prioritize getting your household back to normal." — Bob, Master Technician

Call Bob: 514-700-0706

Diagnostic / Estimation Price: $149.95

Applied directly to the cost of your repair.

Confirmed Dispatch Zone: Blainville, QC and surrounding residential coordinates.

How I Work in Blainville

No surprises. Just honest, old-school appliance repair.

1

1. Show Up On Time

When you call me, I set a tight arrival window and I arrive at your door in Blainville with a truck fully stocked with OEM parts.
2

2. Test the Parts

I physically open up the Dryer and use a True-RMS multi-meter to find the exact broken piece. I show you the problem so you understand the fault.
3

3. Fix It Right

If you approve the quote, I fix it right then and there. The initial diagnostic fee goes entirely towards the final repair. You get a solid guarantee.

What's Actually Wrong With It?

Select your Dryer issue below, and I'll tell you what I usually see when I open these up in Blainville.

← Go Back3. What's the Problem?

Diagnostic Report: Loud Squeaking

Failed Component

Rotational Matrix

Mechanical Fault

The drum support rollers have flattened out, causing metal-on-metal friction.

My Solution

I do a total mechanical teardown. I swap the rollers, idler pulley, and belt all at once so it runs like new.

⚠️ Disclaimer: This is not DIY advice. Modern appliances utilize lethal high-voltage circuits. Diagnostics and repairs should only be performed by a Trained and Certified Appliance Service Technician.

Should I Fix It Or Toss It?

My honest advice on the lifespan of your Kenmore Dryer. Expand below.

Washers & Dryers

✓ Fix It: Clogged drain pumps, snapped dryer belts, burnt thermal fuses, or bad door latches. These are simple, fast, same-day fixes.

✕ Replace It: If a front-load washer sounds like a jet engine on spin cycle and it's over 8 years old, the rear tub bearing is shattered.

Try This Before You Call Me

I don't want to come out for a 5-minute fix you can do yourself. Check these first:

🔌 Power: Check your home's main breaker panel. Sometimes it just tripped.
🔒 Controls: Make sure the "Child Lock" button wasn't accidentally held down.
🌀 Dryer Vent: Go outside and make sure the vent flap isn't choked with lint.

⚠️ DIY Danger Warning

Do not open up the machine if you aren't trained. Modern appliances are dangerous.

⚡ High Voltage: Electric ranges and microwaves hold lethal capacitor charges even when unplugged.
🌊 Flooding: Messing with dishwasher pumps improperly can flood your entire kitchen or the condo below you.

Brand Specific Repairs in Blainville

Select your exact brand below to see common issues and rapid-response solutions we provide across the region.

Kenmore

Kenmore Fridge Repair

Fridge side is too cold. I test the air damper control to restore balance for our Ahuntsic-Cartierville customers.

Kenmore Washer Repair

uL/UE Error (Violent shaking). I replace worn suspension rods to balance out heavy loads from Montreal to Laval.

Kenmore Dryer Repair

Squealing Noise. Full rebuild: I replace the snapped belt, idler pulley, and rollers for your Saint-Laurent property.

I Know These Brands Inside and Out

After many years, you learn the quirks of every manufacturer. I stock the truck based on what breaks the most.

Kenmore

Kenmore didn't build their own machines; they were made by Whirlpool, LG, and Frigidaire. I cross-reference the 3-digit prefix on your model number (like 110 or 795) to find out exactly who built it, so I can source the right original factory part.

FIELD NOTE FROM BOB, 50-YEAR VETERAN

Overheating & Clogged Vents

"Dryers in Blainville that spin but don't heat often have a tripped thermal safety. This is almost always caused by restricted airflow in the wall duct."

The Right Parts Make the Repair

We don't mess around with cheap aftermarket knock-offs. If we fix your Kenmore Dryer, we use genuine OEM parts. They fit right, and they last.

OEM SKU	Component Description

Recent Service Calls

Real work done for real people in Blainville recently.

Job #4029Fixed

"Arrived in Blainville. Client said the Kenmore dryer was spinning but dead cold. Tested the circuits and found a blown thermal safety fuse. Swapped it out and cleaned the wall vent."

Job #5583Fixed

"Dispatched to Blainville. The Kenmore dryer was making a terrible squeaking noise. Opened it up and found the drum support rollers had flattened out. Rebuilt the roller assembly and replaced the belt."

Job #6621Fixed

"Got a call in Blainville. The Kenmore dryer wouldn't start at all, just clicked. Tested the door switch and found it was completely broken internally. Snapped in a new OEM door switch."